|

| AQA1719 Pocket
Dual Range IR/Probe Thermometer |
$149.00
 |

Probe is long enough to hold over hot food containers or
to probe safely with good hand protection.
|
|
|
|
Small and Lightweight, this Waterproof Food
Safety Thermometer is Accurate and Easy to Use...
Our
newest IR thermometer is a very high quality, dual-purpose IR / probe
instrument designed for close inspection for food safety and food
processing survey work. The case is a rugged, completely sealed
waterproof case (IP65 rated) of unique small size.
IR Specifications
- IR Temp Range -67° to +572°F, switchable to
-55° to 250.0°C
- IR Accuracy ±0.6C° or ±1.0F°
in normal range
- Distance to spot ratio
is 1:2.5 (unit must be used for close readings)
- Adjustable emissivity 0.1 to 1.00 in 0.01
increments
Built in Thermocouple
Probe Specifications
- Probe Temp. Range -67°F to +626°F, switchable
to -55°C to 330°C
- Probe Accuracy ±0.5C° or ±0.9F°
in normal range
General Specifications and Features
- Average/ Max/Min (with alarms) and Hold/Store Functions
- Uses 2 AAA batteries for 40 hours of continuous use
(auto-off feature saves battery life)
- 2.7 oz (77 grams) 0.95 x 1.5 x 6.1
inches (24 x 38 x 155 mm)

Probe folds neatly on the back side of the unit. The IR window
and illumination port can be seen on the right. Probe is 5 inches
(127 mm) long. IR measurements are made by holding the face of the
unit upright and directly facing the operator - when the Scan button is
kept depressed, a bright white LED beam illuminates the target area.
For best accuracy, the reading distance should be kept at about 6-8
inches (150-200 mm). The IR reads from the bottom of the unit, not
the end (as in typical IR units). This allows easy visibility of
the LCD screen and
alarm indicators (HACCP refrigeration temperatures, hold temperatures,
cook temperatures).
Hold Scan button down to continue to monitor, when released, the
temperature is held. Press Probe button to activate probe and
measure temperature. When the Probe button is pressed again, the
temperature is held.
|